Bersa Pistol Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Small issue with 380 CC - only about 200 rounds through it when the pin holding in the loaded chamber indicator popped up. I was able to tap it back into place and all was well after, but has anyone experienced this and/or know a way of ensuring it doesn't happen again?

Thanks!


Sent from my iPhone using Tapatalk
 

·
Premium Member
Joined
·
1,043 Posts
Howdy cjr_349, I have heard about pins working their way loose on several difference types of pistols but not for the Loaded chamber indicator for the Bersa 380cc. My Bersa 380cc is my carry weapon so I only have about 2K rounds fired without any problems.
Did you by chance notice if the Loaded chamber indicator pin was not flush with the slide ? If so it could mean that the pin was not properly installed at the factory. Since you tapped the pin back in place it may be OK now. Just keep and eye on it. Do let us know if it is still working properly after your next 200 rounds. By the way what type of ammo are you using??
Good luck.

smilie_flag.gif
 
1 - 2 of 2 Posts
Top