[clampit]

Place the Trigger Spring item #23 into the fork of the Trigger item #22 with the straight tang of the spring to the right. Lower the trigger into the frame making sure the left tand of the spring catches the lip of the frame located just under the Internal Locking System. Now, insert the Trigger Pin item #24 into the frame and the lower hole of the Trigger capturing the spring, drive the pin the rest of the way.

 

[Will]

Place the Trigger Spring item #23 into the fork of the Trigger item #22 with the straight tang of the spring to the right. Lower the trigger into the frame making sure the left tand of the spring catches the lip of the frame located just under the Internal Locking System. Now, insert the Trigger Pin item #24 into the frame and the lower hole of the Trigger capturing the spring, drive the pin the rest of the way.

Hey! I have a TPR9C which I disassembled and now cannot figure out how the trigger spring goes back in. I took pictures as I was disassembling but it looks like I’d have to completely twist the spring around the trigger pin again to get it into the position it needs to be in. Maybe we can get in contact and figure it out. Thank you