how to get the disassembly lever back in 380 thunder bersa
Close
    
    

how to get the disassembly lever back in 380 thunder bersa

This is a discussion on how to get the disassembly lever back in 380 thunder bersa within the Bersa Talk forums, part of the Bersa Forum category; pulled it out cleaning the gun did not read the book first please help....

Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Oct 2012
    Posts
    0

    how to get the disassembly lever back in 380 thunder bersa

    pulled it out cleaning the gun did not read the book first please help.

  2. #2
    Junior Member
    Join Date
    Oct 2012
    Posts
    0
    Yikes. Removing the lever isnt part of field stripping...just rotating it. Hope a gunsmith here can chime in because it looks to me like the barrel needs to be removed to get at the bolt stop and spring that sit on the disassembky lever.

  3. #3
    Junior Member
    Join Date
    Oct 2012
    Posts
    0
    Dude.......you didn't read the manual. You didn't google it on you tube.

    Bersas are so easy....slideback, push lever down and hold with finger.........pull slide a bit further back and lift. Its apart.

    Good Luck man, take your time read the stuff you get.

    RCG

  4. Remove Advertisements
    BersaPistolForum.com
    Advertisements
     

  5. #4
    Junior Member
    Join Date
    Oct 2012
    Posts
    0
    Quote Originally Posted by recoilguy View Post
    Dude.......you didn't read the manual. You didn't google it on you tube.

    Bersas are so easy....slideback, push lever down and hold with finger.........pull slide a bit further back and lift. Its apart.

    Good Luck man, take your time read the stuff you get.

    RCG
    couldnt say it better myself

  6. #5
    Junior Member
    Join Date
    Oct 2012
    Posts
    0
    Just did the same thing. Figured it out though. Just below the barrel. The bolt stop sits on the spring. If you can wedge something between the barrel and the stop(preferably soft as not to mark up the bottom of the barrel), you can compress the spring enough to get the Dis assembly lever back in. I thought I had just ruined my wife's new Christmas gift.Glad I was able to figure this one out. Good Luck.

  7. #6
    Junior Member
    Join Date
    Oct 2012
    Posts
    0

    a little help?

    [QUOTE=jasoncarias;246798]Just did the same thing. Figured it out though. Just below the barrel. The bolt stop sits on the spring. If you can wedge something between the barrel and the stop(preferably soft as not to mark up the bottom of the barrel), you can compress the spring enough to get the Dis assembly lever back in. I thought I had just ruined my wife's new Christmas gift.Glad I was able to figure this one out. Good Luck.[/QUOT


    good job dude. it seems pretty straightforward but could you give any more details for us non-Macgyver types? thanks

  8. #7
    Junior Member
    Join Date
    Apr 2016
    Posts
    2
    Has anyone have had any success putting the disassembly bar back in it? Got this 380 practically free cause the iwner couldnt put the bar back in it!-any help?

  9. #8
    Senior Member robhic's Avatar
    Join Date
    Mar 2013
    Location
    Louisiana
    Posts
    240
    Quote Originally Posted by Kicksatnd12 View Post
    Has anyone have had any success putting the disassembly bar back in it? Got this 380 practically free cause the iwner couldnt put the bar back in it!-any help?
    https://www.bersapistolforum.com/foru...embly-bar.html
    --Robert
    NRA Life Member

  10. #9
    Junior Member
    Join Date
    Aug 2016
    Posts
    1
    you know people need help not smart butt

  11. #10
    Super Moderator Tony1990's Avatar
    Join Date
    Dec 2012
    Location
    Texas
    Posts
    1,043
    Howdy and a big welcome to Bersa Pistol Forum, glad to have you on board. Please let us know a little about yourself by going to New Member Introduction and posting.

    Thanks you.

    cowboy.gif
    Always Fight Crime - Shoot back until it stops.
    NRA member and supporter.

Page 1 of 2 12 LastLast

Similar Threads

  1. bersa thunder 380 deluxe take down lever
    By HGFM in forum Bersa Talk
    Replies: 5
    Last Post: 04-24-2016, 04:35 PM
  2. Replies: 6
    Last Post: 08-23-2011, 08:41 PM

Search tags for this page

bersa 380 disassembly lever

,
bersa thunder 380 disassembly
,
bersa thunder 380 takedown lever came out
,
fixing bersa 380 disassembly lever problems
,
how to change trigger pull on a 380 thunder bolt
,

how to put bersa strip pin in

,

how to put break down lever back in bersa 380 pistol

,

replace disassemble bar on bersa 380

Click on a term to search for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0